BFMVG - ECCOBOND SOLDER 57C, PART B
- MSDS: BFMVG
- Manufacturer: W R GRACE AND CO (EMERSON AND CUMING INC )
- Product Name: ECCOBOND SOLDER 57C, PART B
- National Stock Number: 8040-00-738-1780
Product Identification
Product ID:ECCOBOND SOLDER 57C, PART B
MSDS Date:01/01/1987
FSC:8040
NIIN:00-738-1780
Kit Part:Y
MSDS Number: BFMVG
Responsible Party
Emergency Phone: 617-828-3300
Cage: LO872
Contractor
Telephone: 617-935-4850
Cage: LO872
Ingredients
SILVER (SARA III)
CAS: 7440-22-4
RTECS: VW3500000
Fraction By Weight: >67%
OSHA PEL 0.01 MG/M3
ACGIH TLV: 0.1 MG/M3; 9192
EPA Report Quantity: 1 LB
DOT Report Quantity: 1 LB
NON-HAZARDOUS CURING AGENT
Fraction By Weight: <33%
Hazards
Effects of Overexposure:MATL IS IRRITATING TO EYES & SKIN;HARMFUL IF
SWALLOWED.
First Aid
First Aid:SKIN:WASH W.SOAP & H*2O EYES:FLUSH W. H*2O. INGESTED:GIVE 2
GLASSES H*2O; INDUCE VOMITING.CALL A PHYSICIAN. INHALE:REMOVE TO
FRESH AIR. GIVE CPR/OXYGEN IF NEED. KEEP WARM & QUIET. REMOVE
CONTAMINATED CLOTHING. IF UNCONS DO NOT TAKE ANYTHING BY MOUTH.
Fire Fighting
Flash Point:>300F/149C
Extinguishing Media:CO*2, FOAM, DRY CHEM & H*2O FOG.
Fire Fighting Procedures:WEAR SELF-CNTND BRTHG APP
Unusual Fire/Explosion Hazard:TOXIC FUMES MAY BE EVOLVED UPON EXPOSURE
TO HEAT OR OPEN FLAME.
Accidental Release
Spill Release Procedures:LARGE SPILL,DIKE AREA TO PREVENT
SPREADING.SHOVEL OR PUMP TO DRUM OR SALVAGE TANK;WIPE UP OR ABSORB
SMALL SPILLS WITH VERMICULITE OR OTHER ABSORBENT MATERIAL.COLLECT
WASTE IN SEALED CONTAINERS.
Handling
Handling and Storage Precautions:KEEP AWAY FROM INTENSE HEAT,OPEN
FLAMES.
Exposure Controls
Respiratory Protection:IF EXCED TLV,NIOSH/MSHA APPR SELF-CNTND BRTHG
APP (POS PR MODE)
Ventilation:ADEQUATE VENTILATION.
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NONE
Supplemental Safety and Health
MSDS DATED 5-28-85. THIS IS THE PART-B OF A TWO-PART KIT; & IT APPEARS
TO HAVE A FORMULATION CHANGE FROM THE EARLIER PART-B.
Chemical Properties
HCC:N1
Vapor Pres:<1
Vapor Density:>1
Spec Gravity:3.2
Appearance and Odor:SILVER PASTE
Percent Volatiles by Volume:NEG
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS,PEROXIDES,ACIDS,EPOXIDES.
Stability Condition to Avoid:OPEN CONTAINERS,EXPOSE TO HEAT,FLAME.
Hazardous Decomposition Products:CO,CO*2,OXIDES OF NITROGEN.
Disposal
Waste Disposal Methods:SPILLED MATL & WATER RINSE ARE CLASSIFIED AS
CHEMICAL WASTE,MUST BE DISPOSED OF EITHER BY BURIAL AT A LANDFILL
OR CONTROLLED BURNING.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.